Avaya P330-ML-ML Manuel D’Utilisation

Chapter 2        Avaya P330-ML Layer 2 CLI Commands

98

Avaya P330-ML Reference Guide

Example:

User level: privileged, supervisor.
Use the set port redundancy command to globally enables or disable the port 
redundancy pairs you have defined. Using this command will not delete from 
NVRAM the existing redundancy entries.  

The syntax for this command is:

set port redundancy {enable|disable}

Example:

User level: privileged, supervisor.
Use the set port redundancy command to defines or remove redundancy pairs. A 
port redundancy member  can be any port (including LAG logical port) that is not a  
member of a LAG or another redundancy scheme.    

The syntax for this command is:

set port redundancy <module>/<prim_port> 

<module>/<second_port> {on/off} [<redundancy_name>]

priority

Critical, High, or Low

Router-N# set port powerinline priority 2/3 HighLoad 

Powering priority on port/s 2/3 was set to High

P330-N# set port redundancy enable

All redundancy schemes are now enabled

prim_port

Primary port of the redundancy scheme

second_port

Secondary port of the redundancy scheme

redundancy_name
(Optional)

Name for the redundancy scheme