Avaya P330-ML-ML Manuel D’Utilisation

Chapter 2        Avaya P330-ML Layer 2 CLI Commands

Avaya P330-ML Reference Guide

99

Example:

L If you wish to define a name which includes spaces, you must enclose the entire 

name in quotation marks, for example “new york”.

User level: privileged, supervisor.
Use the set port redundancy-intervals command to configurs the two time constants 
that determine redundancy switchover parameters: 
•

“Min Time-between-switchovers” is the minimum interval between switchover 
of each pair. 

•

“Switchback-interval” is the period the primary port link has to be “up” before 
the system switches back.  
If the switchback interval is zero, the system never switches back. If it is one, 
switchback occurs immediately after the primary port link returns.

The syntax for this command is:

set port redundancy-intervals <min-time-between-switchovers> 

<switchback-interval> | none

Example:

P330-N# set port redundancy 1/7 2/12 on red1

uplink: Port 2/12 is redundant to port 1/7.

Port redundancy is active - entry is effective immediately

min-time-between-switchovers

The minimum time between redundancy 
switchovers for each pair (in milliseconds).

switchback-interval

The period the primary port link has to be 
“up” before the system switches back (in 
milliseconds). 
• If switchback interval is zero, the 

switchback is immediate  

none

The system switches back only if the 
secondary link fails.

P330-N# set port redundancy-intervals 100 20