Avaya P330-ML-ML Manuel D’Utilisation
Chapter 2 Avaya P330-ML Layer 2 CLI Commands
Avaya P330-ML Reference Guide
101
set port spantree disable
User level: privileged, supervisor.
Use the set port spantree disable command to disable the spanning tree
mode for specific switch ports.
Use the set port spantree disable command to disable the spanning tree
mode for specific switch ports.
The syntax for this command is:
set port spantree disable [module/port]
Example:
set port spantree enable
User level: privileged, supervisor.
Use the set port spantree enable command to enable the spanning tree
mode for specific switch ports.
Use the set port spantree enable command to enable the spanning tree
mode for specific switch ports.
The syntax for this command is:
set port spantree enable [module/port]
Example:
set port spantree force-protocol-migration
User level: privileged, supervisor.
Use the set port spantree force-protocol-migration command to set
the port as an RSTP port (and not as common STA port). It forces the port to send a
rapid spanning tree BPDU.
Use the set port spantree force-protocol-migration command to set
the port as an RSTP port (and not as common STA port). It forces the port to send a
rapid spanning tree BPDU.
Module
Module number
Port
Port number
P330-N# set port spantree disable 3/1
port 3/1 was disabled on spantree
Module
Module number
Port
Port number
P330-N# set port spantree enable 3/1
port 3/1 was enabled on spantree