Avaya P330-ML-ML Manuel D’Utilisation

Chapter 2        Avaya P330-ML Layer 2 CLI Commands

Avaya P330-ML Reference Guide

205

The syntax for this command is:

 informs retries <retries-num> timeout <seconds>

Example:

User level: supervisor
Use the snmp-server remote user command to configure a remote-user as a 
target for SNMP notifications.
The syntax for this command is:

 <username> <engineID> <groupname> 

 

{ v1 | v2c | v3 } [auth {md5 | sha} <auth-password> 

 

[priv des56 <priv-password>]]

retries-num

Maximum number of times to resend an inform request.

seconds

Number of seconds to wait for an acknowledgment before 
resending. The default is 3.

P330-N>snmp-server informs retries 5 timeout 30

Done!

username

Variable that specifies the name of the SNMP user. The 
maximum length is 32 bytes.

engineID

The remote SNMP engineID. The SNMP engineID is a 12 byte 
string represented as hexadecimal numbers separated by the 
colon character.
For example, 00:00:00:81:0a:fe:ff:12:97:33:45:12.

groupname

Variable that specifies the name of the SNMP group. The 
maximum length is 32 bytes.

, v2c, v3

The security model assigned to the user in user to group 
association.

auth
(Optional)

A keyword signifying that an authentication password is 
required.

, sha

Keyword that specifies authentication protocol, either 
HMAC-SHA-96 or  MAC-MD5-96.

priv-

password

The privacy password. Valid lengths are 8 - 64 characters.