Avaya P330-ML-ML Manuel D’Utilisation
Chapter 2 Avaya P330-ML Layer 2 CLI Commands
208
Avaya P330-ML Reference Guide
L The stack is reset once the command has been executed.
L You should not load the stack with traffic during this test.
L Please follow the instruction shown on the CLI screen, during the various stages
L You should not load the stack with traffic during this test.
L Please follow the instruction shown on the CLI screen, during the various stages
of this test.
The syntax for this command is:
stack health
Example:
sync time
User level: privileged, supervisor.
Use the sync time command to synchronize the time used by all modules in the
switch.
Use the sync time command to synchronize the time used by all modules in the
switch.
The syntax for this command is:
sync time
Example:
tech
User level: supervisor
Use the tech command to enter tech mode. This command is reserved for service
personnel use only.
Use the tech command to enter tech mode. This command is reserved for service
personnel use only.
telnet
User level: user, privileged, supervisor
Use the telnet command to open a Telnet session to a remote host.
Use the telnet command to open a Telnet session to a remote host.
P330-N>stack health
TThis operation will eventually result in a Stack reset.
- do you want to continue (Y/N)? y
Start testing stack health....
This test will take a few minutes!!
The stack health test was completed successfully
P330-N# sync time
Time has been distributed.