Avaya P330-ML-ML Manuel D’Utilisation
Chapter 2 Avaya P330-ML Layer 2 CLI Commands
Avaya P330-ML Reference Guide
209
The syntax for this command is:
telnet
<ip-address> [<port-number>]
Example:
terminal
User level: user, privileged, supervisor
Use the terminal width and terminal length commands to set the width
and length of the terminal display in characters.
The syntax for this command is:
Use the terminal width and terminal length commands to set the width
and length of the terminal display in characters.
The syntax for this command is:
terminal {width|length} [<characters>]
Example:
username
User level: supervisor
Adds a local user account.
L By default there is only a single user account, named 'root', with password
Adds a local user account.
L By default there is only a single user account, named 'root', with password
'root', which access the administrator level. You cannot delete this basic user
account, nor can you modify its access level. You can modify its basic password.
account, nor can you modify its access level. You can modify its basic password.
The syntax for this command is:
username <name> password <passwd> access-type {read-only|read-
write|admin}
ip-address
The IP address of the remote host.
port-number
The port number over which to open the Telnet connection.
P330-N>telnet 149.22.38.127
Router-N> terminal width 80
terminal width: 80
name
New user name (minimum four characters)
passwd
User’s password (minimum four characters)
access-type
Access type definition - read only, read-write or
administrator
administrator