Avaya P330-ML-ML Manuel D’Utilisation
Chapter 3 Avaya P330-ML Layer 3 CLI Commands
Avaya P330-ML Reference Guide
235
Example:
To set the maximum number of ARP cache entries to 8000:
To set the maximum number of ARP cache entries to 8000:
To restore the maximum number of ARP cache entries to its default:
ip max-route-entries
User level: privileged, supervisor.
L If you are at the ”privileged” level, you can only access this command in
L If you are at the ”privileged” level, you can only access this command in
Configure mode.
Type configure at the command prompt to enter configure mode.
Type configure at the command prompt to enter configure mode.
The ip max-route-entries command exists for compatibility with Avaya™
P550. There is no limitation on the size of the routing table, except for the amount of
available memory.
Use the no ip max-route-entries command to remove the limitation.
L For this command to take effect, run the copy running-config startup-
P550. There is no limitation on the size of the routing table, except for the amount of
available memory.
Use the no ip max-route-entries command to remove the limitation.
L For this command to take effect, run the copy running-config startup-
config
command and reset the device.
The syntax for this command is:
[no] ip max-route-entries <value>
Example:
ip netmask-format
User level: privileged, supervisor.
L If you are at the ”privileged” level, you can only access this command in
L If you are at the ”privileged” level, you can only access this command in
Configure mode.
Type configure at the command prompt to enter configure mode.
Type configure at the command prompt to enter configure mode.
Use the ip netmask-format command to specify the format of netmasks in the
show
show
command output.
Use the no ip netmask-format command to restores the default format which is
Router-N(configure)# ip max-arp-entries 8000
Router-N(configure)# no ip max-arp-entries
value
Number of entries
Router-N(configure)# ip max-route-entries 4000