Avaya P330-ML-ML Manuel D’Utilisation

Chapter 3        Avaya P330-ML Layer 3 CLI Commands

Avaya P330-ML Reference Guide

285

User level: privileged, supervisor.
Use the ip rip split-horizon command to enable split-horizon mechanism. 
Use the no ip rip split-horizon command to  disable the split-horizon. 
By default split-horizon is enabled.
The split-horizon technique prevents information about routes from exiting the 
router interface through which the information was received. This prevents routing 
loops.

The syntax for this command is:

[no] ip rip split-horizon

Example:

User level: privileged, supervisor.
Use the ip routing-mode command to set the IP routing mode of the interface. In 
RT-MGMT mode, the interface functions as a routing interface. In 
RT_PRIMARY_MGMT mode, the interface function as both a routing interface and 
the primary management interface. 
The IP address used in MSNM is the primary management interface IP address. 
Only one interface can be in RT_PRIMARY_MGMT mode. If no interface is 
configured to RT_PRIMARY_MGMT, the IP address used in MSNM is selected 
randomly. 

The syntax for this command is:

ip routing-mode <mode>

Example:

Router-N(configure-if:marketing) # no ip rip split-horizon

Done!

mode

 RT_MGMT or RT_PRIMARY_MGMT mode

Router-N(config-if:marketing)#ip routing-mode