Avaya P330-ML-ML Manuel D’Utilisation

Chapter 3        Avaya P330-ML Layer 3 CLI Commands

286

Avaya P330-ML Reference Guide

User level: privileged, supervisor.
Use the

ip srrp backup

command to backup an additional interface of the main 

router using the SRRP application. If the main router fails, the switch takes over its 
activities on all configured interfaces.

The syntax for this command is:

<main router addr>

Example:

User level: privileged, supervisor.
Use the ip vlan and ip vlan name commands to specify the VLAN on which an 
IP interface resides. You can specify either the VLAN ID using the ip vlan 
command or the VLAN name using the ip vlan name command. 
The no ip vlan or no ip vlan name  command to reset the IP interface to the 
default VLAN.

The syntax for this command is:

[no] ip vlan <vlan-id>

or

ip vlan name <vlan-Name>

Example:
To specify VLAN developmental as the VLAN used by interface “products”:

L If you wish to enter a name which includes spaces, you must enclose the entire 

name in quotation marks, for example “new york”.

main router addr

IP address of the main router interface

Router-N(config-if:marketing)#ip srrp backup 192.168.50.11

 

 

Router-N(config-if:marketing)# ip vlan name development