Avaya P330-ML-ML Manuel D’Utilisation
Chapter 2 Avaya P330-ML Layer 2 CLI Commands
40
Avaya P330-ML Reference Guide
Example:
ip access-list-dscp trust
User level: supervisor
L This command applies to the P334T-ML only when it is in device mode
L This command applies to the P334T-ML only when it is in device mode
"Layer2".
Use the ip access-list-dscp trust command to decide which original
frame priority to trust for the placement of the frame in the internal priority queues.
frame priority to trust for the placement of the frame in the internal priority queues.
The syntax for this command is:
ip access-list-dscp trust <policy-list-number>
{untrusted|trust-cos |trust-dscp }
Example:
action
permit | deny | deny-and-notify | fwd0 | fwd1... fwd7:
• permit: do nothing, let the packet pass
• deny: drop the packet
• deny-and-notify: drop the packet and send an SNMP trap
• fwd0, fwd1...fwd7: set the frame COS field to 0...7
• permit: do nothing, let the packet pass
• deny: drop the packet
• deny-and-notify: drop the packet and send an SNMP trap
• fwd0, fwd1...fwd7: set the frame COS field to 0...7
Router-N# ip access-list-dscp operation 101 0-63 permit
Router-N# ip access-list-dscp operation 101 62 fwd5
policy-list-
number
number
A valid id number for a policy list currently defined for the module
(100...149)
(100...149)
untrusted
Forward the packet with priority 0
trust-cos
Forward the packet with its original 802.1p priority (default)
trust-dscp
Forward the packet with the maximum priority between 802.1p and
the priority obtained from the DSCP-CoS mapping table
the priority obtained from the DSCP-CoS mapping table
Router-N# ip access-list-dscp trust 100 trust-dscp
Done!