Avaya P330-ML-ML Manuel D’Utilisation
Chapter 2 Avaya P330-ML Layer 2 CLI Commands
42
Avaya P330-ML Reference Guide
ip http enable
User level: supervisor
Use the ip http enable command to enable HTTP access to the device.
Use the ip http enable command to enable HTTP access to the device.
The syntax for this command is:
ip http enable
Example:
ip icmp redirect
User level: supervisor
Use the ip icmp redirect command to enable ICMP redirects via the device.
Use the ip icmp redirect command to enable ICMP redirects via the device.
The syntax for this command is:
ip icmp redirect
Example:
ip simulate
User level: supervisor
L This command applies to the P334T-ML only when it is in device mode
L This command applies to the P334T-ML only when it is in device mode
"Layer2".
Use the ip simulate command to check the policy for a simulated packet. The
command contains the addressed list number, and the packet parameters.
command contains the addressed list number, and the packet parameters.
The syntax for this command is:
ip simulate <policy-list-number> [<priority>] [<dscp-
value>]<source> <destination> [<protocol> [<source port>
<destination port> [<established>]]]
P330-N# ip http enable
Done!
P330-N# ip icmp redirect
Done!
policy-list-number
integer (100...149, 0-default list)
priority
fwd0 | fwd1 | ... | fwd7
dscp-value
dscp0 | dscp1 | ... | dscp63