Avaya P330-ML-ML Manuel D’Utilisation
Chapter 2 Avaya P330-ML Layer 2 CLI Commands
44
Avaya P330-ML Reference Guide
ip telnet-client enable
User level: supervisor
Use the ip telnet-client enable command to enable the device to act as a
Telnet client.
L This command can only be run from the console port on the device.
Use the ip telnet-client enable command to enable the device to act as a
Telnet client.
L This command can only be run from the console port on the device.
The syntax for this command is:
ip telnet-client enable
Example:
no ip http
User level: supervisor
Use the no ip http command to disable HTTP access to the device.
Use the no ip http command to disable HTTP access to the device.
The syntax for this command is:
no ip http
Example:
no ip icmp redirect
User level: supervisor
Use the no ip icmp redirect command to disable ICMP redirects via the
device.
Use the no ip icmp redirect command to disable ICMP redirects via the
device.
The syntax for this command is:
no ip icmp redirect
Example:
P330-N# ip telnet-client enable
Done!
P330-N# no ip http
Done!
P330-N# no ip icmp redirect
Done!