Avaya P330-ML-ML Manuel D’Utilisation

Chapter 2        Avaya P330-ML Layer 2 CLI Commands

Avaya P330-ML Reference Guide

69

The syntax for this command is:

set interface ppp <ip_addr> <net-mask>

Example:

User level: privileged, supervisor.
Use the set interface ppp command to enter modem mode, enter terminal 
mode, disconnect the PPP session or to reset the connected modem.
The syntax for this command is:

set interface ppp {enable|enable-always|disable|off|reset}

Example:

ip_addr

IP address used by the P330-ML Supervisor Module to connect 
via its PPP interface

net-mask

Subnet mask used by the P330-ML Supervisor Module to 
connect via its PPP interface

P330-N# set interface ppp 149.49.34.125 24 

Interface ppp ip address set

enable

Enable PPP and enter modem mode.

enable-always

Enter modem mode every time that the proprietary modem 
cable is plugged into the console port. 

disable

Disable PPP and enter terminal mode

off

Disconnect the active PPP session.

reset

Reset the connected modem.

P330-N# set interface ppp reset 

PPP has reset the connected modem.