Avaya P330-ML-ML Manuel D’Utilisation
Chapter 2 Avaya P330-ML Layer 2 CLI Commands
70
Avaya P330-ML Reference Guide
Example:
Example:
set intermodule port redundancy
User level: privileged, supervisor.
Use the set intermodule port redundancy command to define the stack’s
unique intermodule redundancy scheme. The defined scheme can be cleared using
the set intermodule port redundancy off command.
L You must disable Spanning Tree before you can enable intermodule port
Use the set intermodule port redundancy command to define the stack’s
unique intermodule redundancy scheme. The defined scheme can be cleared using
the set intermodule port redundancy off command.
L You must disable Spanning Tree before you can enable intermodule port
redundancy.
The syntax for this command is:
set intermodule port redundancy <module/prim-port>
<module/second-port> {on [<name>]}
Example:
L If you wish to define a name which includes spaces, you must enclose the entire
name in quotation marks, e.g. "new york".
P330-N# set interface ppp enable
Entering the Modem mode within 60 seconds...
Please check that the proprietary modem cable is plugged
into the console port
P330-N# set interface ppp disable
Entering the Terminal mode immediately
module/prim-port
Primary port number
module/second-port
Secondary port number
on
Set the intermodule redundancy
name
Name of the fast redundancy (default is
'intermodule')
'intermodule')
P330-N# set intermodule port redundancy 1/7 2/12 on
backbone
backbone: port 2/12 is intermodule redundant to port 1/7