Alcatel Carrier Internetworking Solutions 7700 Manuel D’Utilisation
March 2005
Using WebView
45
Logging In to WebView
Note. Before attempting to establish a WebView session,
be sure that you have first unlocked the HTTP session
type via the aaa authentication command. Otherwise, a
login error will occur. See
be sure that you have first unlocked the HTTP session
type via the aaa authentication command. Otherwise, a
login error will occur. See
for more information.
To access WebView and log in to a switch:
).
2 Enter the switch’s IP address in the browser’s
“Address” text field (“Location:” for Netscape users). The
login screen displays:
“Address” text field (“Location:” for Netscape users). The
login screen displays:
3 Enter the user name and password at the login prompt.
Remember, if you have already changed the user name and
password for your switch, be sure to use the new information.
If you have not changed your user name or password, the
factory defaults are admin and switch, respectively. Refer to
the Switch Management Guide for information on modifying
the default user name and password.
password for your switch, be sure to use the new information.
If you have not changed your user name or password, the
factory defaults are admin and switch, respectively. Refer to
the Switch Management Guide for information on modifying
the default user name and password.
Navigating WebView
After you have successfully logged in, the Chassis Manage-
ment home page displays:
ment home page displays:
The Chassis Management home page provides a physical
representation of the switch, as well as basic system informa-
tion. This is the main launching point for WebView.
representation of the switch, as well as basic system informa-
tion. This is the main launching point for WebView.