Alcatel Carrier Internetworking Solutions 7700 Manuel D’Utilisation

Using WebView

47

General online help is available through the main Help link 
located in the top WebView banner:

Detailed, context-based help is provided for each status table 
and configuration dialog window:

For more information on using WebView, refer to “Using 
WebView” in the Switch Management Guide.

This suggests either a physical or network connection issue. 
Try the following options:

• Be sure that you have a good physical Ethernet cable 

connection to the Ethernet port used for managing the 
switch (EMP or NI port).

• Be sure your computer has a valid Ethernet connection 

and IP address. See 

 for information on config-

uring the IP address for the EMP.

• Verify that all required WebView image files are 

installed in the current running directory. See 

 

for more information.

This suggests either a user name and password or Authenti-
cated Switch Access error. Try the following options:

• Check that you are using the correct user name and 

password. If you have already changed the user name 
and  password for your switch, be sure to use the new 
information. If you have not changed the user name 
and  password, the factory defaults are admin and 
switch, respectively.

• Be sure that you have “unlocked” HTTP sessions on 

the switch. To unlock HTTP sessions, enter the follow-
ing command:

-> aaa authentication http local

 for information on unlocking session types.

General Help Link

Context-specific Help 
button.

(In this case, for the VLAN 
Administration table.)