Advantech EKI-7758F Manuel D’Utilisation

 

EKI-7758F User Manual                                                 26 

After you have logged in to the system, you will see a command prompt. To enter CLI management interface, 
type in “enable” command. 
 

 

 
 
The following table lists the CLI commands and description. 
 
 

 

User EXEC 

Begin a session with 
your switch. 

switch> 

Enter logout or quit. 

The user commands available 
at 
the user level are a subset of 
those available at the 
privileged level. 
Use this mode to 
• 

Perform basic tests. 

Display system information. 

Privileged 
EXEC 

Enter the enable 
command while in  
user EXEC mode. 
 

switch# 

Enter disable to exit. 

The privileged command is 
advance mode 
Privileged this mode to 
• 

Display advance function 

status 
• 

save configures 

Global 
configuration 

Enter the configure 
command while in 
privileged EXEC  
mode. 

switch(config)# 

To exit to privileged 
EXEC mode, enter 
exit 

or end 

Use this mode to configure 
parameters that apply to your  
switch as a whole. 
 

VLAN database 

Enter the vlan 
database 

command 

while in privileged 
EXEC mode. 

switch(vlan)# 

To exit to user EXEC 
mode, enter 
exit

. 

Use this mode to configure 
VLAN-specific parameters. 
 

Interface 
configuration 

Enter the interface 
command (with a 
specific interface) 
while in global 
configuration mode 

switch(config-if)# 

To exit to global  
configuration mode, 
enter exit. 
To exist to privileged 
EXEC mode,  or end.

Use this mode to configure  
parameters for the switch and 
Ethernet ports.