IBM 990 Manuel D’Utilisation

Page de 282
6947ch03.fm
Draft Document for Review April 7, 2004 6:15 pm
98
 
IBM eServer zSeries 990 Technical Guide
Adapter interruptions apply to a z990 FICON Express channel when in FCP mode (FCP 
CHPID type), which supports attachment of SCSI devices in a Linux for zSeries environment.
z990 FCP SCSI IPL feature enabler (FC 9904)
This optional z990 feature (FC 9904) allows Linux on zSeries operating system IPL from a 
SCSI or FCP disk. Both IPL of logical partition images and z/VM guests are supported.
Using this feature, Linux logical partitions can be started and run completely from SCSI or 
FCP disks. Further, a standalone dump program can be loaded from such a SCSI or FCP 
disk in order to dump the contents of a logical partition, and the dump data can be written to 
this same disk.
z990 FCP concurrent patch
FICON channels, when configured as CHPID type FCP, support concurrent patch allowing 
application of new Licensed Internal Code (LIC) without requiring a configuration off / on. This 
is a zSeries exclusive FCP availability feature, available with FICON Express feature codes 
2319 and 2320.
3.4.4  OSA-Express adapter
Following is a discussion of the connectivity options in the OSA-Express environment. The 
z990 supports the following OSA-Express features:
򐂰
OSA-Express Gigabit Ethernet (GbE) Long Wavelength (LX), feature code 1364
򐂰
OSA-Express Gigabit Ethernet (GbE) Short Wavelength (SX), feature code 1365
򐂰
OSA-Express Gigabit Ethernet (GbE) Long Wavelength (LX), feature code 2364
– Brought forward on an upgrade only
򐂰
OSA-Express Gigabit Ethernet (GbE) Short Wavelength (SX), feature code 2365
– Brought forward on an upgrade only
򐂰
OSA-Express 1000BASE-T Ethernet, feature code 1366
򐂰
OSA-Express Fast Ethernet, feature code 2366
– Brought forward on an upgrade only
򐂰
OSA-Express Token Ring, feature code 2367
A z990 server can support a maximum of 24 OSA-Express features (48 ports).
Table 3-10   OSA-Express features support
Note: if FDDI or ATM connectivity is desired, a multiprotocol switch or router with the 
appropriate network interface (for example, 1000BASE-T Ethernet, Gigabit Ethernet) can 
be used to provide connectivity between the z990 server and an FDDI or ATM network.
I/O feature
Feature codes
Number of
Maximum number
PCHID
CHPID 
definition
Config. 
rules 
notes
Ports 
per card
Ports
increments
Ports 
I/O 
slots
OSA-E Gbit Ethernet 
LX/SX
1364/1365
(2364/2365)
2
2
48
(24)
24
(12)
yes
OSD
1, 2, 3
OSA-E 1000BASE-T 
Ethernet
1366
2
2
48
24
yes
OSE, OSD, 
OSC
1, 2