Fujitsu V6.00 Manuel D’Utilisation
24
ServerView
Event
Manager
Viewing alarms
●
In the bottom right section of the window you can find out information on the
selected alarm entry in the alarm list via the two or three tabs provided:
selected alarm entry in the alarm list via the two or three tabs provided:
–
Alarm Details
tab - contains a brief description of the selected alarm entry
in the alarm list.
–
Alarm Information
tab - contains detailed information on the selected
alarm entry as stored in the MIB.
–
Server Information
tab - provides information on the server from which the
selected alarm entry originates. Under
General Information
you will see
general information about the server (e.g. system name, IP address,
community name) and under
community name) and under
Additional Information
you will see additional
information as stored in the Server Properties (e.g. administrator,
location, model).
location, model).
On this tab you will also find a link, depending on whether the server in
question is entered in the ServerView server list or not.
question is entered in the ServerView server list or not.
If the server is in the server list, you can use the
Edit Server Settings
link
to open the
Server Properties
window for this server, via which you can
change the configured values for the server.
If the server is not in the ServerView server list, you can use the
Add
Server
link to start the Server Browser and add the server to the list. For
more information on the Server Properties and the Server Browser, see
the ServerView Operations Manager User Guide.
the ServerView Operations Manager User Guide.
I
The
Server Information
tab is only available if both the event
manager and the Operations Manager are installed on the
management station.
management station.
An executable program was triggered by this alarm.
This alarm was forwarded to the management station.
Table 3: Icons in the Alarm Monitor