Fujitsu V6.00 사용자 설명서

24

 

 ServerView 

Event 

Manager

●

In the bottom right section of the window you can find out information on the 
selected alarm entry in the alarm list via the two or three tabs provided:

–

 tab - contains a brief description of the selected alarm entry 

in the alarm list.

–

 tab - contains detailed information on the selected 

alarm entry as stored in the MIB.

–

 tab - provides information on the server from which the 

selected alarm entry originates. Under 

 you will see 

general information about the server (e.g. system name, IP address, 
community name) and under 

 you will see additional 

information as stored in the Server Properties (e.g. administrator, 
location, model). 

On this tab you will also find a link, depending on whether the server in 
question is entered in the ServerView server list or not. 

If the server is in the server list, you can use the 

 link 

to open the 

 window for this server, via which you can 

change the configured values for the server. 

If the server is not in the ServerView server list, you can use the 

 link to start the Server Browser and add the server to the list. For 

more information on the Server Properties and the Server Browser, see 
the ServerView Operations Manager User Guide.

I

The 

 tab is only available if both the event 

manager and the Operations Manager are installed on the 
management station.

An executable program was triggered by this alarm.

This alarm was forwarded to the management station.

Table 3: Icons in the Alarm Monitor