Perle Systems 4030370 Manuel D’Utilisation
314
Configuring a Fiber Optic Card
Configuring a Fiber Optic Card
Overview
SCS IOLAN models support the ability to replace the second Ethernet interface with a fiber optic
connection.
connection.
Field Descriptions
Configure the following parameters:
No additional configuration is required for the fiber card.
The fiber card will now replace the second Ethernet interface on the unit. All configuration
parameters related to “Interface 2” will now apply to the fiber card. If the options card configuration
is changed to “None” or the card is removed from the PCI slot, the second Ethernet interface will be
come active again using the configuration parameters for “Interface 2”.
parameters related to “Interface 2” will now apply to the fiber card. If the options card configuration
is changed to “None” or the card is removed from the PCI slot, the second Ethernet interface will be
come active again using the configuration parameters for “Interface 2”.
Card
Specify the type of fiber card you will be using.
z
KTI KG-500F—Gigabit fiber card.
z
Transition Networks N-FX-SC5-02—100MB card.
The type selected must match the card installed in the PCI slot.