Perle Systems 4030370 Manuel D’Utilisation
366
Configuring HTTP Tunnels
Configuring HTTP Tunnels
Serial-to Serial
The following example will demonstrate how to set up a serial device (VT100 Terminal) to serial
device (Linux host, console port) connection via an HTTPS tunnel. HTTPS will be used because data
security is required. Because IOLAN 1 is behind the firewall, it will need to initiate the HTTP tunnel
connection.
For more HTTP tunneling configuration parameters see
device (Linux host, console port) connection via an HTTPS tunnel. HTTPS will be used because data
security is required. Because IOLAN 1 is behind the firewall, it will need to initiate the HTTP tunnel
connection.
For more HTTP tunneling configuration parameters see
Configure a “connect to” HTTP tunnel on IOLAN 1
Note:
When HTTP tunneling is used TCP and UDP ports 50000 and above are reserved and
should not be configured by the user.
Internet
100.10.50.2
100.10.50.1
IOLAN 1
IOLAN 2
HTTPS Tunnel--Encrypted Data
VT100
Linux Host
Console Management
Terminal
IP address of IOLAN 2
Check HTTPS for
secure tunnel con-
nection. This must
match configuration
on IOLAN 2
secure tunnel con-
nection. This must
match configuration
on IOLAN 2
Match name on IOLAN 2