Perle Systems 4030370 Manuel D’Utilisation

RADIUS and TACACS+  381

RADIUS

This section describes the attributes which will be included by the IOLAN when sending an 
accounting message to the RADIUS server.

1

User-Name

The name of the user to be authenticated.

4

NAS-IP-Address

IP Address of IOLAN LAN interface.

5

NAS-Port

If the user is connected to a physical port then the port 
number of the port is sent. If the user is connected to the 

IOLAN itself then a port number of 0 is sent.

6

Service-Type

Indicates the service to use to connect the user to the 

IOLAN. A value of 6 indicates administrative access to 
the IOLAN. Supported values are:

z

1—Login

z

3—Callback-Login
Equivalent to the IOLAN 

 set by Type 

15, Login-Service.

z

2—Framed

z

4—Callback-Framed
Equivalent to the IOLAN 

 set by Type 

7, Framed-Protocol.

z

7—NAS prompt

z

9—Callback NAS-prompt
Equivalent to IOLAN 

.

z

6—Administrative User

z

11—Callback Administrative User

Equivalent to IOLAN 

and the 

User gets Admin privileges.

14

Login-IP-Host

 For LOGIN and CALLBACK service types, the IPv4 

address of the login host is sent to the radius accounting 
host.

31

Calling-Station-Id

For reverse telnet and reverse ssh the IP address of the 

client will be sent. All other server type do not send this 

field.

32

NAS-Identifier

If the identifier is configured then this field will be sent.

40

Acct-Status-Type

Indicates if this is the beginning or end of a session. 
Supported values are: 1 = Start 2 =Stop.

42

Acct-Input-Octets

Number of bytes which were received from the user 

during this session.

43

Acct-Output-Octets

Number of bytes where were transmitted to the user 

during this session.

44

Acct-Session-ID

A string which identifies the session. The same string 
must be used in the start and stop messages.

45

Acct-Authentic

Indicates how the user was authenticated. Supported 

values are: 1 = Local 2 = RADIUS.