Metrologic Instruments SP5600 Manuel D’Utilisation

 

10 

I

NSTALLATION

 

 

D

ATA 

U

PLOAD 

 

 

1.  To transfer the data collected select the Utilities option. 
2. Select 

the 

Download Method option on the next menu and then select the appropriate method for 

downloading files to the host device. 

3.  The Wi-Fi can send data in real time, however, if cradle options (Cradle-IR or IrDA) are selected re-insert 

the Optimus unit into the cradle and upload the data to the host device. 

 

To change the download method select the Utilities option from the main menu and then select the Download 
Method from the list of available options.  This allows the user to alter the method by which data is transferred to 
the host device.  
 

 

Note: Plugging the Optimus into a serial port or USB port on the host device does not 

guarantee communication with the Optimus.  Ensure that the communication port on 
the host device is not populated by another device.  Confirm that the communication 
settings on both the host device and the Optimus correspond prior to a program 
download or data upload.   

 
The OptimusRW is similarly connected to the host device and programmed however, there is a key difference in 
the data collection process.  The OptimusRW supports transmission of data wirelessly and as such has the 
capability of communicating that data in real time.  The unit needs to be setup to communicate with the network 
as follows:  
 

1.  With the Optimus powered off, press and hold the 7, 9, and power keys.  The System Module menu will 

appear on screen.  

2.  Using the arrow keys select the Wi-Fi Menu option.   
3.  The list of settings that appears is the settings that require configuration in order for the Wi-Fi to function 

effectively. 

4. Select 

Information option to view the current configuration settings on the Optimus. 

5. Select 

the 

Network Set option to configure the network settings.  This is similar to enabling the network 

settings on a PC.  

6. Select 

WLAN Setting to select and configure the Optimus for the appropriate network available to connect 

to the host device. 

7. Select 

Security to setup any security/authentication settings that match the host device. 

8. Select 

the 

Echo Test to test the settings and verify that the network settings on the Optimus are 

configured correctly and that the Optimus is communicating with the host device. 

9.  Power off the Optimus.    
 

Upon completion of the configuration process, and depending on the active application program, the user will be 
able to begin data transmission via Wi-Fi communication.   
 

 

Note: Contact a Metrologic Instruments representative if assistance is required when 

integrating a Metrologic device into a network.