Metrologic Instruments SP5600 Manuel D’Utilisation

 

12 

I

NSTALLATION

 

 

 

 

S

ETTING

 

D

ESCRIPTION

 

D

EFAULT

 

Clock 

Set date and time for the system. 

N/A 

Backlight ON Period 

Set the duration for the keyboard/LCD backlight 

CPU Speed 

Set CPU running speed. There are five speeds available:  
Full speed, half speed, quarter speed, eighth speed and 
sixteenth speed. 

Auto Off 

Set time threshold for automatically power off when no 
operation is taking place during that specified period. If 
this value is set to zero, this function will be disabled. 

Power On Options 

There are two possible selections: Program Resume, 
which starts from the program being used during the last 
session before the last power-off; and Program Restart, 
which starts with a new program. 

Key Click 

Select a tone for the beeper or disable the beeper when 
the user presses a key button. 

System Password 

Set a password to protect the user from entering the 
system menu. 

Font 

Current font displayed on the Optimus display 

Reset to Default 

Resets the system settings to the default settings 

 

 

 
The OptimusR has numerous tests available to the user for both operation and diagnostics.  Depending on the 
application program that is in the active memory will determine which tests can be performed and are available to 
the user.  The following table provides a description of the available tests. 
 

S

ETTING

 

D

ESCRIPTION

 

Reader 

To test the reading performance of the scanner. The following symbologies are 
enabled for the Reader test.  All other symbologies will need to be enabled via 
programming. 
Default bar codes: Code 39, Industrial 25, Interleave 25, Codabar, Code 93, Code 128, 
UPCE, UPCE with ADDON 2, UPCE with ADDON 5, EAN8, EAN8 with ADDON 2 
EAN8 with ADDON 5, EAN13, EAN13 with ADDON 2, and EAN13 with ADDON 5 

Buzzer 

To test the buzzer with different Frequency/Duration. Press ENTER key to start and 
then press any key to stop the test. 

LCD & LED 

To test LCD display and LED indicator. Press ENTER key to start and then press any 
key to stop the test. 

Keyboard 

To test the rubber keys. Press a key and the result will be shown on the LCD display. 
Note that the FN key should be used in conjunction with numeral keys. 

Memory 

To test the data memory (SRAM). Note after the test, the contents of the memory 
space will be wiped out. 

 

Warning: This test erases any data stored in the terminal. 

Echo Test 

Echo Test is used to test the communication between the cradle and the PC.  Perform 
Echo test from the host device that the cradle is connected.