SUPER MICRO Computer AOCS2308LL8E Manuel D’Utilisation
AOC-USAS-L8i Add-on Card User’s Manual
8-4
The supported stripe size is 64 kilobytes. Refer to
for more information about Integrated Striping volumes.
8-7
Creating IS Volumes
The SAS BIOS CU is part of the Fusion-MPT BIOS. When the BIOS loads during boot
and you see the message about the Configuration Utility, press Ctrl-C to start it. After
you do this, the message changes to:
and you see the message about the Configuration Utility, press Ctrl-C to start it. After
you do this, the message changes to:
Please wait, invoking SAS Configuration Utility...
After a brief pause, the main menu of the SAS BIOS CU appears. On some systems,
however, the following message appears next:
however, the following message appears next:
LSI Configuration Utility will load following initialization!
In this case, the SAS BIOS CU will load after the system has completed its power-on
self test.
self test.
Follow the steps below to configure an Integrated Striping (IS) volume with the SAS
BIOS CU. The procedure assumes that the required controller(s) and disks are already
installed in the computer system. You can configure an IM/IME volume and an IS
volume on the same SAS controller.
BIOS CU. The procedure assumes that the required controller(s) and disks are already
installed in the computer system. You can configure an IM/IME volume and an IS
volume on the same SAS controller.