SUPER MICRO Computer AOCS2308LL8E Manuel D’Utilisation
AOC-USAS-L8i Add-on Card User’s Manual
8-6
4. When you are prompted to select a volume type, select C
REATE
IS V
OLUME
.
The C
REATE
N
EW
A
RRAY
screen (
) that appears shows a list of disks that
can be added to a volume.
5. Move the cursor to the RAID D
ISK
column. To add a disk to the volume, change the
N
O
to Y
ES
by pressing the + key, - key, or
SPACE
bar.
As disks are added, the A
RRAY
S
IZE
field changes to reflect the size of the new
volume.
6. When you have added the desired number of disks to the array, press C and then
select S
AVE
C
HANGES
. Then exit this menu to commit the changes.
The configuration utility pauses while the array is being created.
Be aware that there are several limitations when creating an IS (RAID 0) volume:
•
All disks must be either SATA (with extended command set support) or SAS (with
SMART support).
SMART support).
•
Disks must have 512-byte blocks and must not have removable media.
•
There must be at least two and no more than ten drives in a valid IS volume. Hot
spare drives are not allowed.
spare drives are not allowed.
Figure 8-4. Create New Array Screen