Sharp AR-M257 Manuel D’Utilisation

■ Is there enough computer memory or hard disk space?

To use the machine, your computer must have sufficient 
memory and hard disk space. If there is insufficient hard disk 
space, delete unnecessary files to increase the free space of 
the hard disk. If there is insufficient memory, close unnecessary 
applications to increase memory available for printing.

■ If your computer is connected to the machine 

The machine may not operate correctly if the parallel port 
mode is set to EPP mode. To set the parallel port mode to a 
mode other than EPP mode, refer to your computer manual 
or ask the manufacturer of the computer. ECP mode is 
recommended to obtain the best performance from the 
machine. Note that some computers may use different 
names for the modes.

■ Is AppleTalk enabled?

In Mac OS X, click "Network" in "System Preferences" and 
select Ethernet in "Show". Click the "AppleTalk" tab and 
make sure that "Make AppleTalk Active" is selected.
In Mac OS 9.0 to 9.2.2, open the "Chooser" from the Apple 
menu and make sure that "Active" is selected. Printing is not 
possible if "Active" is not selected.

■ Is "Ethernet" selected for the "Connect via" of 

Open "AppleTalk" from the "Control Panels" and make sure 
that "Ethernet" is selected in the "Connect via" menu. 
Printing is not possible if "Ethernet" is not selected.

If you are using Windows XP/Server 2003, the "Found 
New Hardware Wizard" may appear after you change 
the port setting. In this case, click the "Cancel" button to 
close the wizard, and then reinstall the printer driver as 
explained in "USING THE MACHINE WITH A 
PARALLEL OR USB CONNECTION" in the software 
setup guide for network printer.