Schneider Electric SR2MAN01 Manuel D’Utilisation

PROGRAMMING Menu

48

SR2MAN01 11/2007

Parameters are entered in the same way, whatever the parameters screen:

To modify the parameters of an existing element, simply:

1

Enter the desired automation function: Step 

1 of the element entry (see Method for 

Entering a Contact or Coil, p. 43) procedure.
When the function has parameters, 

Param appears in the contextual menu (when the 

Shift key is pressed).
Illustration: 

2

Press and hold down the 

Shift key and press on Param (key  ).

Result: The function’s parameter screen appears.

3

Use the navigation keys to move to the cursor over the modifiable parameters: 

.

4

Modify the value of the parameter using the 

+ and - keys, holding down Shift. 

5

Confirm the modifications by pressing 

Menu/OK, which will open the confirmation window.

Confirm again by pressing the 

Menu/OK key to save. 

1

Use the navigation keys to move the cursor over the element to modify: step 

1 of the 

element entry (see Method for Entering a Contact or Coil, p. 43) procedure.

2

At the same time, hold down 

Shift and the Param key to open the parameter window.

3

Carry out steps 

3 to 5 above.