Schneider Electric SR2MAN01 用户手册
PROGRAMMING Menu
48
SR2MAN01 11/2007
Entering
Parameters on
Creation of the
Block
Parameters on
Creation of the
Block
Parameters are entered in the same way, whatever the parameters screen:
Modifying the
Parameters of
Existing Blocks
Parameters of
Existing Blocks
To modify the parameters of an existing element, simply:
Step Action
1
Enter the desired automation function: Step
1 of the element entry (see Method for
Entering a Contact or Coil, p. 43) procedure.
When the function has parameters,
When the function has parameters,
Param appears in the contextual menu (when the
Shift key is pressed).
Illustration:
Illustration:
2
Press and hold down the
Shift key and press on Param (key ).
Result: The function’s parameter screen appears.
3
Use the navigation keys to move to the cursor over the modifiable parameters:
.
4
Modify the value of the parameter using the
+ and - keys, holding down Shift.
5
Confirm the modifications by pressing
Menu/OK, which will open the confirmation window.
Confirm again by pressing the
Menu/OK key to save.
Menu / OK
ins.
-
Param
+
Del.
Step Action
1
Use the navigation keys to move the cursor over the element to modify: step
1 of the
element entry (see Method for Entering a Contact or Coil, p. 43) procedure.
2
At the same time, hold down
Shift and the Param key to open the parameter window.
3
Carry out steps
3 to 5 above.