Multiquip HS62 Manuel D’Utilisation

The Multiquip 

Side Winder

 Cut-Off Saw comes with a Tool Kit

(Figure 1) that assists you with day to day operations. You will
need these tools for the assembly of your saw.

Item  

G

 is a versatile screwdriver/wrench that accommodates

common bolt/screw  and  nut head sizes of your saw.

Item  

H

   is the wrench necessary to accommodate various

allen screws.

Locate the Cutting Arm and remove it from the box.

Remove the following items from the Cutting Arm Assembly:

Locate the Main Saw Body and remove it from the box.

Remove the following items from the Main Saw Body:

Verify that the 

cutting arm is in the collapsed position, items 

N

will be at the rear of the slots as shown in Figure 7. Walk the belt

item 

P

 off the spindle pulley.

Install the 

main cutting arm ~ ensure that the V-belt is firmly

seated around the 

crankshaft pulley groove (see Figure 8).

Ensure the main cutting arm is seated all the way on the main
saw body, and re-install the hardware that you previously

removed (items 

L

 and  

M

) and fully tighten.

■  Guard  Adjustment Knob 

I

■  Two Cap Screws (2) 

J

■  Cover Guard 

K

■  Two Security Nuts and Washers 

L

■  One Cap Screw  

M