Multiquip HS62 Manuel D’Utilisation
PAGE 18 — HS62 CUT-OFF SAW — OPERATION & PARTS MANUAL — REV. #5 (09/12/05)
HS62 CUT-OFF SAW — SAW ASSEMBLY INSTRUCTIONS
Blade Installation Procedure
STEP 1
For proper installation, first remove the
blade shaft nut
X
,
outer flange
Y
, and
inner “dual-arbor” flange
Z
.
Figure 12. Inner and Outer Flanges (Removal)
Figure 13. Inner and Outer Flanges (Placement)
STEP 2
A dual sided, “dual-arbor”
inner flange
Z
accommodates either
a 20 mm or 1-inch arbor hole for operator safety and convenience.
The
outer flange
Y
fits on top of the cutting blade.
STEP 3
Chose the proper
blade arbor side of the inner flange (to match
your cutting blade arbor) and place this selected side to the
blade shaft
[
.
Figure 14. Selecting the Proper Blade Arbor
STEP 4
Match the arbor side to the dimension of your blade arbor and
“sandwich” between the inner and outer flanges. Tighten the
blade shaft nut
“sandwich” between the inner and outer flanges. Tighten the
blade shaft nut
X
securely to hold the blade in place.
Figure 15. Securing the Cutting Blade