Intel SERVER CHASSIS SR2500 SR2500 Manuel D’Utilisation
Codes de produits
SR2500
Product Overview
Intel® Server System SR2500AL
Revision – 1.00
Intel order number D31980-004
8
1.7 Power
Sub-system
The power subsystem of the chassis consists of an integrated power distribution board and
module enclosure which is capable of housing up to two 750 Watt power supply modules
supporting 1+0 or redundant 1+1 power configurations. In a 1+1 redundant configuration, each
power supply module is hot-swappable should one fail.
module enclosure which is capable of housing up to two 750 Watt power supply modules
supporting 1+0 or redundant 1+1 power configurations. In a 1+1 redundant configuration, each
power supply module is hot-swappable should one fail.
The power sub-system has several integrated management features including:
• Status LED on each power module
• Over-temperature protection circuitry
• Over-voltage protection circuitry
• Over-temperature protection circuitry
• Over-voltage protection circuitry
With the addition of server management software, the power subsystem is capable of
supporting several system management features including:
supporting several system management features including:
• Remote Power On/Off
• Status
• Status
Alerting
• FRU Information Reporting
Each power supply module operates within the following voltage ranges and ratings:
PARAMETER
MIN
RATED
MAX
Start-up
Vac
Power
Off
Vac
Max Input
AC Current
Max Rated
Input AC
Current
Line Voltage
(110)
(110)
90V
rms
100-127
V
rms
140V
rms
85Vac
±4Vac
±4Vac
75Vac
±5Vac
±5Vac
12 A
rms
1,3
11.0A
rms
4
Line Voltage
(220)
(220)
180V
rms
200-240
V
rms
264V
rms
-
-
6.0
A
rms
2,3
5.5A
rms
4
Frequency
47 Hz
50/60Hz
63 Hz
1
Maximum input current at low input voltage range shall be measured at 90Vac, at max load.
2
Maximum input current at high input voltage range shall be measured at 180VAC, at max load.
3
This is not to be used for determining agency input current markings.
4
Maximum rated input current is measured at 100VAC and 200VAC.
1.8 System
Cooling
The chassis is offered with two system cooling options. The first option is a three fan solution
providing sufficient airflow to maintain internal system thermal requirements when the external
ambient temperature remains within specified limits. The second option is a 5+1 fan
configuration. Refer to section 3.2 for details. Should a single fan failure occur, this option
provides support for hot-swap fans and fan redundancy.
providing sufficient airflow to maintain internal system thermal requirements when the external
ambient temperature remains within specified limits. The second option is a 5+1 fan
configuration. Refer to section 3.2 for details. Should a single fan failure occur, this option
provides support for hot-swap fans and fan redundancy.
In addition to the system fan options, each power supply module installed provides two
additional non-redundant fans which pull air from inside the chassis out the back.
additional non-redundant fans which pull air from inside the chassis out the back.
1.9 Chassis
Security
The chassis provides support for a lockable front bezel which prevents unauthorized access to
the system control buttons and hard drives. In addition, a chassis intrusion switch is provided
allowing server management software to monitor removal of the top cover from the chassis.
the system control buttons and hard drives. In addition, a chassis intrusion switch is provided
allowing server management software to monitor removal of the top cover from the chassis.