Справочник Пользователя для Intel SERVER CHASSIS SR2500 SR2500

Intel® Server System SR2500AL 

 

 

The power subsystem of the chassis consists of an integrated power distribution board and 
module enclosure which is capable of housing up to two 750 Watt power supply modules 
supporting 1+0 or redundant 1+1 power configurations. In a 1+1 redundant configuration, each 
power supply module is hot-swappable should one fail.  

The power sub-system has several integrated management features including: 

•  Status LED on each power module 
•  Over-temperature protection circuitry 
•  Over-voltage protection circuitry 

With the addition of server management software, the power subsystem is capable of 
supporting several system management features including: 

•  Remote Power On/Off 
• Status 

Alerting 

•  FRU Information Reporting 

Each power supply module operates within the following voltage ranges and ratings: 

Line Voltage 
(110) 

90V

rms

 100-127 

V

rms

 140V

rms

 

85Vac 
±4Vac 

75Vac 
±5Vac 

12 A

rms

1,3

 11.0A

rms

 

4 

Line Voltage 
(220) 

180V

rms

 200-240 

V

rms

 264V

rms

 - 

- 

6.0 

A

rms

2,3 

5.5A

rms

 

4 

Frequency 

47 Hz 

50/60Hz 

63 Hz 

 

 

 

 

1 

Maximum input current at low input voltage range shall be measured at 90Vac, at max load. 

2 

Maximum input current at high input voltage range shall be measured at 180VAC, at max load.   

3 

This is not to be used for determining agency input current markings.

 

4 

Maximum rated input current is measured at 100VAC and 200VAC.

 

The chassis is offered with two system cooling options. The first option is a three fan solution 
providing sufficient airflow to maintain internal system thermal requirements when the external 
ambient temperature remains within specified limits. The second option is a 5+1 fan 
configuration. Refer to section 3.2 for details.  Should a single fan failure occur, this option 
provides support for hot-swap fans and fan redundancy. 

In addition to the system fan options, each power supply module installed provides two 
additional non-redundant fans which pull air from inside the chassis out the back. 

The chassis provides support for a lockable front bezel which prevents unauthorized access to 
the system control buttons and hard drives.  In addition, a chassis intrusion switch is provided 
allowing server management software to monitor removal of the top cover from the chassis.