Echo PAS-265 Manuel D’Utilisation

DO NOT use a metal scraper to remove dirt from the cylinder fins.

5.  Use brush to remove dirt from the cylinder fins.

6.  Remove grass and leaves from the grid between the recoil starter 

and fuel tank.

7.  Assemble components in reverse order.

Tools Required:   Cross Head Screwdriver,  4mm Hex Wrench, Soft    

 

 

 

Metal Brush

Parts Required:  Spark Arrestor Screen, Gasket

 

 

 

1.  Remove muffler cover screw and muffler cover (A).

2.  Place piston at Top Dead Center (TDC) to prevent carbon/dirt from 

entering cylinder.

3.  Remove spark arrestor screen (B), gasket (C) and exhaust guide (D) 

from muffler body.

4.  Clean carbon deposits from muffler components.

When cleaning carbon deposits, be careful not to damage the cata-

lytic element inside muffler.

5.  Replace screen if it is cracked, plugged or has holes burned  

through.

6.  Assemble components in reverse order.