Tascam DM-3200 Manuel D’Utilisation

You may have noticed that the channel-to-buss 
assignment functions are not available from the rout-
ing screens.

Because this is such a commonly-performed opera-
tion, it is most easily performed from the front panel, 
using dedicated controls, though it is also possible to 
use the display to view and set these assignments for 
many modules simultaneously.

This method uses the dedicated assignment keys to 
the left of the display:

When a module (not a bus module) is selected, any 
buss assignment made is shown by the appropriate 
indicator(s) lighting.

Use these assignment keys to assign the module to 
the busses (which in turn may be routed to multitrack 
inputs, etc., using the routing screens described ear-
lier in “Output routing” on page 49).

It is also possible to assign a module to the stereo 
buss using the dedicated 

 key.

In addition, a 

 key provides the capability of 

producing a direct channel output which can then be 
used for routing in the 

ROUTING

 screens. When this is 

selected, any buss assignments are removed.

These screens 

allow you to assign channels to the busses, and the 

busses and the aux sends to the appropriate destina-
tions, in an easy graphical solution.