Tascam DM-3200 Manuel D’Utilisation

In surround mode with 

the pan switch on, the meaning is different—channel 
modules are assigned to one or both of the surround 
panners for fine adjustment.

In addition to using the cursor and 

 keys for 

assigning the channels modules to the surround bus-
ses, the 

 keys can also be used.

With the pan switch on, use any of the 

 keys 

1 through 8 to turn surround 1 on and off (all indica-
tors light together) and 

 keys 9 through 16 to 

turn surround 2 on and off.

See “Surround operations” on page 75 for further 
details of this and other surround operations, includ-
ing the individual assignment of channels to surround 
matrix output channels with the pan switch off.

Assignments from 

the busses may be made to the stereo buss as well as 
to the aux 1–2 send busses (which can therefore be 
used as studio monitors).

Assignments from the aux sends can be made to the 
stereo buss only.

Assignments from the stereo buss are to the aux 1–2 
send busses (again for monitoring).

The POD 1 and POD 2 

switches correspond to “assign all” and “de-assign 
all” on-screen buttons.

For channel assignments, use the POD 4 encoder to 
select a target buss (or the stereo buss or direct out-
put) for channels and then press 

ALL CH ON

 (POD 1) 

or 

ALL CH OFF

 (POD 2) to assign or de-assign all chan-

nels to or from the selected target.

Buss assignments may be made to the stereo buss 
and/or the aux 1–2 buss pair. The labels of the on-
screen buttons change here to 

ALL BUSS ON

 (POD 1) 

and 

ALL BUSS OFF

 (POD 2).

For aux sends and the stereo buss, the button labels 
are 

ALL ON

 (POD 1) and 

ALL OFF

 (POD 2).

The balance between odd- and 

even-numbered busses is set in the 

MODULE AUX/BUSS

 

screens (see “Aux and buss setup” on page 68). See 
also “BUSS PAN Follows ST PAN” on page 34 for-
details of how buss and stereo panning are linked.