Whirlpool N/A Manuel D’Utilisation

Electronic  

Temperature 
increase 
indicators 

Heat 
Maintenance

Extra 
browning

Cooking time 

Clock

End of 
cooking time 

When the oven is connected to the power supply for the first time, or reconnected after a power 
failure, the display indicates “

”.

To switch on the oven: 
1. Turn knob 

to “0”. 

2. press the 

 

button. The display shows “--:--”. 

Selecting and changing the clock time:
1. Press the button 

 

 three times.

2. Turn the knob 

 

 within 15 seconds to set the time of day.  The time of day flashes on the display.

3. Press the button 

 

 or wait 15 seconds to get automatic confirmation of the setting. 

To modify the time of the day:
Press the button 

 

 twice 

 blinks on the display. Repeat the steps described above.

Select cooking function:
1. Turn knob 

 to the chosen function: the preset temperature or grill level will flash on the 

display. 

2. If this value is right, press the button 

 

 to confirm or wait 10 seconds to have the setting 

accepted automatically. 

1. Turn knob 

!

: the temperature (or grill level when knob 

 is on the selection 

) 

blinks on the display. 

2. Press button 

 

 to confirm or else wait about 10 seconds to have the setting accepted 

automatically. 

The oven begins operation about 5 seconds after confirmation:  the temperature increase 
indicators   on the display turn on sequentially, indicating the temperature increase on the 
graduated scale °C . 
Notes: 
The set values can be changed even during cooking. 
At the end of cooking: 
Switch off the oven by turning knob 

 back to “0”. The time of day appears again on the display.

Important notes: 
To cancel any selection made, turn knob 

 to “0”. 

Keeping button 

 

 down for 5 seconds deactivates the audio signal associated with the manipulation of knobs and buttons. 

Press button 

 

 again for 5 seconds to reactivate.  For safety reasons, the oven switches off automatically (except for the 

“

” and 

 functions) after 4.5 hours of continuous operation.

Selecting the cooking time:
Select the cooking time (available with any function) to turn the oven on for a specified period of 
time. At the end of the specified time the oven will switch off automatically. The maximum 
programmed cooking time is 3 hours and 59 minutes.
1. Set the function and temperature or grill level (see chapter:  “Fast starting the oven” and 

“Selecting the cooking function”).

2. Repeatedly press the button 

 

, the indicator 

 blinks on the display and “-0:00” appears.

3. Turn knob 

!

 clockwise: the selected time blinks on the display. The appearance of the dash 

“-” indicates that the chosen time decreases until “0” is reached. 

4. The oven automatically starts cooking 20 seconds after the setting and the time remaining until 

the end of cooking appears on the display.
Note: To view or change the previously set temperature, turn the knob 

!

 by one click. To return 

to the display of the remaining time, wait 20 seconds or press the button 

 

. 

To use the special functions Extra browning 

 and Heat Maintenance 

, consult the chapter 

“Special functions”.

To change the pre-set temperature or grill level: 
Turn the knob 

!

 and confirm by pressing the button 

 

 or wait about 10 seconds for automatic 

acceptance of the setting. 

When the pre-set time (end of cooking) runs out, 

 appears on the display and an acoustic 

signal sounds for 15 minutes in intervals.  The oven switches off automatically and the oven's interior 
lamp stay on for 25 min. 

1. Press button 

 

 to stop the acoustic signal.

2. Turn knob 

 back to “0”. The lamp turns off.

The time of day appears again on the display.

ON/OFF - Function Selector Knob

 

Button to select and confirm 
programmes

!

Knob to change preprogrammed values 
(temperature, time, levels)

 

!