Saeco Coffee Makers SG200E Manuel D’Utilisation
17
English
Safety switch
- The sockets that are not compatible with the
plug of the machine should be replaced.
- The use of extensions, adapters and/or
multiple plugs is forbidden (fig 17).
6.6
Machine start-up
The machine is equipped with a safety switch -
located on its top cover (fig. 18) which
disconnects the utilities whenever the door is
opened (see wiring diagram).
Therefore, open the door or unplug the
installation in case of need.
Warning
During the setting-up phase, before powering up
the machine, make sure you have connected it
to the hydraulic system and opened the water
tap.
Warning
The safety switch remains live (ref. 1, fig. 18)
- For some operations, it is however necessary
to operate with the door open but the vending
machine connected to the mains.
Skilled technicians may operate in this way, by
inserting the special plastic key, supplied with
the machine, into the switch located on the
machine top cover, turning it of 90° (fig. 18).
Warning
The opening and possible machine start with door
open must only be performed by authorized and
technically qualified personnel. Do not leave the
machine unattended while it is open.
Give the key to qualified and authorized personnel
only.
Whenever the machine is switched on a test
cycle is performed in order to verify the correct
position of the moving parts and the presence of
water and other products.
fig.17
fig.18