Smeg CIR34AX Manuel D’Utilisation
Instructions for the installer
13
5 ADAPTATION TO DIFFERENT TYPES OF GAS
Before performing any cleaning or maintenance work, detach the
appliance from the electrical socket.
The hob has been adjusted for natural gas at a pressure of 1.0 kPa.
For functioning with other types of gas the nozzles must be replaced
and the primary air adjusted.
To replace the nozzles and regulate the burners, you have to remove
the top as described in the following paragraph.
For functioning with other types of gas the nozzles must be replaced
and the primary air adjusted.
To replace the nozzles and regulate the burners, you have to remove
the top as described in the following paragraph.
5.1
Removing the control panel
(models with separable
control panel)
1.
Remove the knobs and the knob guard tube “A” by pulling them
up;
up;
2.
Use a crosshead screwdriver to remove the screws and the two
cylindrical supports “B”;
cylindrical supports “B”;
3.
Raise the left-hand side of the control panel slightly and shift it to
the right to remove it completely;
the right to remove it completely;
4.
In models with electric hotplate, the body of the pilot light has to be
removed to free the control panel;
removed to free the control panel;