Logitech Ft Manuel D’Utilisation

8

Logitech®

to your wireless access point, you can press the 

 arrow to go back and fix 

your settings.  If you are still having trouble, check the Troubleshooting section at 
the end of this guide. 

7.  Choose whether you want the Squeezebox to obtain an IP address automatically 

using DHCP, or whether you want to assign it a static IP address. Most networks 
will let Squeezebox obtain an address automatically. Press the 

 arrow. 

 

If you chose to assign Squeezebox a static IP, enter it using the numbers on the 
remote. Press the 

 arrow to save the address.

Tip: Use leading zeroes to specify numbers with fewer than 3 digits, for example, 
you would enter 00.00.00.8 for 0...8. 

 

Enter the subnet mask for the network, the default gateway IP address, and the 
address of your DNS server, pressing the 

 arrow on the remote to move to 

each one. 

.  If SlimServer isn’t already running, start it now. 

 

Squeezebox will scan your local network to find the computer that’s running 
SlimServer. If you started SlimServer after configuring Squeezebox, you may need 
to scroll to find it. 

.  Select the computer you want to use. If you are running SlimServer on multiple 

computers on your local network, you can use the 

 arrow to scroll to the 

one you want to use.

3.  Press the 

 arrow on the remote to connect.

Setup is complete.

Tip: If you want to go back to setup later press the 

 arrow on the remote 

down and hold it for five seconds. Squeezebox will return to the Set Up 
Networking menu.

Press 

 to put Squeezebox into standby mode. This will dim the display, stop the 

music and show a clock. Press 

 again to wake Squeezebox.