Logitech Ft Manuel D’Utilisation

7

Squeezebox™ Owner’s Guide

When you plug in Squeezebox, a logo is displayed briefly, followed by a welcome 
message.

.  Press the 

arrow on the remote control. The Set Up Networking menu 

option is displayed.

.  Press the 

arrow to enter networking setup.

3.  Choose whether you want to connect Squeezebox to a wireless or wired network 

by pressing the 

 and 

 arrows on the remote. When you have made your 

selection, press the 

 arrow.

.  Squeezebox asks you for your local region or country. Scroll using the 

 

arrow on the remote until you find the local region. Press the 

 arrow to 

select your region.

Note: Failure to select the appropriate region may violate local laws.

5.  Squeezebox will scan to find your wireless network.  Select your network name 

(SSID) and press the 

 arrow.

 

If you are in an area where there are multiple wireless networks, you can scroll 
down using the remote until you find the one you want to use. If your router is 
not broadcasting your network name, you will need to select “Enter a network 
name”. 

Tip: You can use the number buttons on the remote to enter text as you might 
on a cell phone. Use the ADD button on the remote as a backspace and the PLAY 
button to insert a letter. 

 

6.  If your network is secured with WEP or WPA encryption, you’ll need to enter the 

network password or key using the numbers and letters on the remote and press 
the 

 arrow. If your network supports more than one type of encryption at 

a time or is not broadcasting its SSID, Squeezebox may ask you to choose your 
encryption method first.

Tip: WEP keys consist of a string of ten or twenty-six digits or letters A through F. 
WPA passwords are a string of letters, numbers or punctuation. 

 

Squeezebox connects to your wireless network. If Squeezebox does not connect