Philips hd78106 Manuel D’Utilisation

English

introduction

With SENSEO

, you can enjoy a perfect cup of coffee

with a delicious crema layer whenever you feel like it.

Each cup is freshly brewed, so you’re always sure of a

pure and round taste. SENSEO

combines a unique

brewing method from Philips with convenient coffee

pods from Douwe Egberts, available in different blends

of fine roast and ground coffee. Together they make sure

you only get the very best in flavour and aroma from the

coffee.

The Douwe Egberts coffee in convenient SENSEO

coffee pods and Philips’ unique new SENSEO

brewing system are perfectly matched to ensure that the

best taste and aroma are extracted from the coffee.

To optimise the taste of the coffee, keep the following

aspects in mind:

Fresh water

Use fresh water every day. If you have not used the coffee

machine for three days, you have to flush it with fresh

water before you use it again (see section ‘Flushing’ in

chapter ‘Cleaning’).

Fresh coffee pods

Use the SENSEO

coffee pods that have been specially

developed by Douwe Egberts for your SENSEO

coffee

machine for a full, round taste. Douwe Egberts SENSEO

coffee pods stay fresh longer if you close the package

with the keep-fresh seal after use or if you store them in

a storage container.

A clean machine

Clean and descale the Philips SENSEO

coffee machine

regularly (see chapters ‘Cleaning’ and ‘Descaling’). Remove

used coffee pods after brewing. If a used pod has been

left in the coffee machine and you have not used the

machine for some time, flush the machine before you use

it again (see section ‘Flushing’ in chapter ‘Cleaning’).

general description (Fig. 1)

Water reservoir

Lid of water reservoir

1-cup pod holder °

2-cup pod holder °°

Coffee spout

Cover of coffee spout

Drip tray

Cup tray

Water distribution disc

Sealing ring

Outflow valve

Indicator light

important

Read these instructions for use carefully before you use

the machine and save them for future reference.

Check if the voltage indicated on the bottom of

the machine corresponds to the local mains voltage

before you connect the machine.

If the mains cord is damaged, it must be replaced

by Philips, a service centre authorised by Philips

or similarly qualified persons in order to avoid a

hazard.

To prevent unexpected contact with hot water,

always make sure the lid of the SENSEO

machine

is properly locked before you start using the

machine.

Never put normal ground coffee or use torn pods

in the SENSEO

machine, as this causes it to

become blocked.

Do not use the machine in combination with

a transformer, as this could cause hazardous

situations.

Put the machine on a flat, stable surface. Never let

the machine operate unattended.

Do not use the machine at altitudes higher

than 2200 metres above sea level.

The machine does not work at temperatures below

10°C.

Flush the coffee machine with fresh water before

you use it for the first time (see chapter ‘Preparing

the machine for use’). This causes the boiler to fill

with water, which is essential for the machine to

work properly.

This appliance is not intended for use by persons

(including children) with reduced physical, sensory

or mental capabilities, or lack of experience and

knowledge, unless they have been given supervision

or instruction concerning use of the appliance by a

person responsible for their safety.

Children should be supervised to ensure that they

do not play with the appliance.
Electromagnetic fields (EMF)

This Philips appliance complies with all standards

regarding electromagnetic fields (EMF). If handled

properly and in accordance with the instructions in this

instruction manual, the appliance is safe to use according

to scientific evidence available today.

Preparing the machine for use

You cannot brew coffee if you have not flushed the

SENSEO

coffee machine first!

The flushing cycle causes the boiler to fill with water.

After this, the coffee machine is ready for use.

Flush the machine in the following way:

Remove the water reservoir (Fig. 2).

Fill the water reservoir with cold water up to

the

MAX

indication and put it back onto the

machine. (Fig. 3)

Move the lever upwards to release the lid (Fig. 4).

Open the lid (Fig. 5).

Put the 1-cup pod holder ° or the 2-cup pod

holder °°in the machine without pod(s). (Fig. 6)

Close the lid and lock the lever (Fig. 7).

Note: Make sure you lock the lever properly. Push it down

until it snaps home with a click.
Note: Never flush the machine with the lid open. The lid

must be properly locked.

Put the plug in an earthed wall socket.

Put a bowl (with a capacity of at least 1500ml)

under the coffee spout to collect the water. (Fig. 8)

Press the on/off button

and subsequently press

the 1-cup button ° and the 2-cup button °°

briefly at the same time. (Fig. 9)

The boiler fills itself with water from the water

reservoir. This takes some time (approx. 90 to 150

seconds). The machine switches off automatically

when the flushing cycle ends. During the flushing

cycle, the machine produces more noise than

during a regular brewing cycle.

Note: Before you use the machine for the first time, clean

the coffee spout and the pod holders with hot water and

some washing-up liquid or in the dishwasher. Clean the

water reservoir thoroughly in hot water, if necessary with

some washing-up liquid.

Now your Philips SENSEO

coffee machine is ready for

use.

Brewing coffee

Fill the water reservoir with cold water up to

the

MAX

indication and put it back onto the

machine. (Fig. 3)

Never pour milk, coffee, hot water or carbonated water

into the water reservoir.

MIN: minimum amount of water required to

brew 1 cup of SENSEO

coffee.

°°

MIN: minimum amount of water required to

brew 2 cups of SENSEO

coffee.

A full reservoir allows you to make SENSEO

coffee

a number of times (up to

5 cups (HD7810, HD7812) or up to 10 cups

(HD7811). This makes it unnecessary to fill the

water reservoir each time you want to make a cup

of coffee.

Press the on/off button

. (Fig. 10)

The indicator light blinks while the water is heating up.

Heating up takes approx. 90 seconds.

The coffee machine is ready for use when the

indicator light burns continuously.

Move the lever upwards to release the lid (Fig. 11).

Open the lid.

Place the appropriate pod holder in the machine.

Note: Make sure the pod holder is clean and the sieve in the

centre is not clogged, e.g. with loose coffee grounds.

If you want to make one cup of SENSEO

coffee,

use 1 coffee pod in combination with the 1-cup pod

holder ° and the 1-cup button °. (Fig. 12)

If you want to make two cups of SENSEO

coffee,

use 2 coffee pods in combination with the deeper

2-cup pod holder °° and the 2-cup button
°°

. (Fig. 13)

Place the SENSEO

coffee pod(s) properly in the

centre of the pod holder, with the convex side

pointing downwards.

Note:Use SENSEO

coffee pods from Douwe Egberts

specially designed for your SENSEO

coffee machine for a

full and round taste.

Place 1 SENSEO

coffee pod in the 1-cup pod

holder °. (Fig. 14)

Place 2 SENSEO

coffee pods in the 2-cup pod

holder °°. (Fig. 15)

Note: Make sure the coffee in the pod(s) is evenly distributed

and press the pod(s) lightly into the pod holder.
Note: Never put normal ground coffee or use torn pods in

the SENSEO

machine, as this causes it to become blocked.

Close the lid and lock the lever (Fig. 7).

Always make sure the lid is properly locked. Push the

lever down until it snaps home with a click.
Never start brewing with the lid open. The lid must be

properly closed.

Place one cup or two cups under the spout

openings (Fig. 16).

The cups you use should have a capacity of at least

150ml. Do not use cups that are too large, as they cause

the coffee to get cold more quickly.

Press the button that indicates the number of cups

of SENSEO

coffee you want to brew. (Fig. 17)

for one cup

°°

for two cups

The SENSEO

coffee machine starts brewing.

The machine automatically supplies the optimal

amount of water.

You can interrupt the brewing process at any time

by pressing the on/off button I. If you switch the

machine back on after you have interrupted the

brewing process, the machine does not complete the

interrupted brewing cycle.

Do not remove the water reservoir during a brewing

cycle, as this causes the machine to draw in air. When

this happens, the next cup will only be partly filled.

Note: If you only get a small quantity of coffee or no coffee

at all out of the machine, you have not flushed the machine

properly before first use. As a result, the boiler is not or not

completely filled. Flush the machine properly (see chapter

‘Preparing the machine for use’) before you brew another

cup of coffee.

After use, lift the pod holder out of the machine

and remove the coffee pod(s).

Be careful when you do this, for there may still be some

water/coffee on the coffee pod(s).

Tips

Rinse the pod holders and the coffee spout

regularly to make sure that the coffee always tastes

optimally.

The SENSEO

coffee tastes best if you stir it

before you drink it.

If you intend to make another cup of SENSEO

coffee later, just leave the coffee machine switched

on. The machine automatically switches itself off

after 1 hour. (Fig. 18)
Cleaning

Never immerse the SENSEO

coffee machine in water.

Never clean the machine by flushing it with the lid open.

Always unplug the machine before you clean it.

Clean the outside of the machine with a moist

cloth.

Remove the coffee spout (Fig. 19).

You can disassemble the coffee spout for more

thorough cleaning. (Fig. 20)

4222.001.9719.8

2/4