Jura Capresso 13422 Manuel D’Utilisation

18

2 Preparing and using your IMPRESSA for the first time

 

T Place a receptacle (at least 500 ml) under the frother.

 c T Press the maintenance button.

. Water will flow out of the frother.

 

E You can interrupt rinsing of the filter at any time by pressing 

any button. 

 

E The water may be slightly discoloured. This is not harmful to 

health and does not affect the taste. 

Filter rinsing stops automatically after approx. 500 ml. 

 appears on the display, then 

 is dis-

played. The filter is now activated.

 

E However, if you are using the CLARIS filter cartridge and have 

activated it, you will not be able to adjust the water hard-
ness.

The harder the water is, the more frequently the IMPRESSA needs to 
be descaled. It is therefore important to adjust the water hardness.

The water hardness can be adjusted on a continuous scale between 
1° dH and 30° dH. This can also be deactivated, which means that 
the IMPRESSA will not let you know when it has to be descaled. 
You can find out what the water hardness is by using the Aquadur® 
test strip supplied as standard.

 

T Hold the test strip briefly (for one second) under flowing 

water. Shake off the water.

 

T Wait for about one minute.

 

T You will then be able to read the degree of water hardness 

from the discolouration of the Aquadur® test strip and the 
description on the packaging.
You can now adjust the water hardness.

Example: To change the water hardness from 

 to 

, proceed as follows:

Precondition: 

 is displayed.

 

T Open the cover of the Rotary Switch.

 k T Keep the Rotary Switch pressed until 

 appears.

Determining water 
hardness and   adjusting