Jura Capresso 13422 Manuel D’Utilisation

19

2 Preparing and using your IMPRESSA for the first time

 g T Turn the Rotary Switch until 

 is displayed.

 k T Press the Rotary Switch to enter the programme item.

 g T Turn the Rotary Switch until 

 is displayed.

 k T Press the Rotary Switch to confirm the setting.

 appears briefly on the display to confirm the setting.

 g T Turn the Rotary Switch until 

 is displayed.

 k T Press the Rotary Switch to exit programming mode.

 appears on the display.

 

T Close the cover of the Rotary Switch.

You can adjust the grinder continuously to suit the roast of your cof-
fee.

If you adjust the fineness of grind when the grinder is not operating, 
the grinding wheel could be damaged.

 

T Only adjust the fineness of grind when the grinder is run-

ning.

The fineness of grind setting is correct if the coffee flows regularly 
from the coffee spout. A fine, thick crema is also formed.
Our recommendations:

 Z

Select a fine setting for a light roast.

 U

If the fineness of grind setting is too fine, the coffee only 
drips from the coffee spout.

 Z

Select a coarse setting for a darker roast.

 U

If the fineness of grind is too coarse the coffee flows too 
quickly from the coffee spout.

Example: To change the fineness of grind during coffee preparation, 
proceed as follows:

 

T Open the cover of the bean container.

 

T Remove the aroma preservation cover.

 

T Place a cup under the coffee spout.

Adjusting the grinder 

CAUTION