Cuisinart EM-350 Manuel D’Utilisation

8

8.  If you do not need foam, but only steamed 

milk, lower the steam nozzle further into 

the milk to prevent excess foam from 

forming. Move the pitcher in a circular 

motion so wand is not steaming in  

one place.

9.  Stop the steam immediately by turning the 

STEAM control dial to the closed position.

10.  Remove the pitcher, immediately wipe the 

steam nozzle and wand with a clean damp 

cloth and purge a small amount of steam. 

1.  Place the cup or container under the 

steam/hot water nozzle and activate the 

hot water function 

by turning the 

steam and hot water control dial to the hot 

water setting.

2.  Once you have dispensed the required 

amount of hot water into the cup or 

container, stop the hot water by turning 

the steam/hot water control dial to the O 

position.

3.  Remove the cup or container and swing 

the steam/hot water wand over the drip 

tray to catch any drips of water.

Hotter   is the default setting. If Hot is 

desired, press the   button and allow a few 

seconds for the temperature to decrease. 

The flashing light will turn steady when it has 

reached temperature.
NOTE: When the machine shuts off, and is 

turned back on, the last temperature setting 

used will be illuminated.
Energy Saver Mode 

After 30 minutes of non-use the espresso 

machine will automatically switch to sleep 

mode and all the control lights will be 

dimmed by about 50%. When any button is 

pressed, the espresso machine will return to 

preheat mode and all the lights will flash. 

The machine is ready to operate when all the 

lights are steady again.
Auto-Off Mode 

Following the 30-minute 

Energy Saver cycle, if 

there is an additional  

30 minutes of non-use, 

the espresso machine 

will turn off. Press the power button to turn 

on again.

We recommend regular cleaning of the 

espresso maker’s external components.
1.  Never immerse the machine in water or 

other liquids. The housing and external 

parts may be cleaned with a soapy, damp, 

non-abrasive cloth.

2.  To remove the drip tray, simply slide it 

toward you, keeping it level at all times in 

order to prevent spills. The drip tray and 

drip tray grate are dishwasher safe. Do 

not clean drip tray with cleansers, steel 

wool pads or other abrasive materials.

It is normal over time for discoloration, 

spotting or staining to appear in the water 

reservoir. Results will vary depending on the 

mineral content of the bottled or filtered 

water used but will not affect the operation 

of the machine. However, be sure to clean 

the water reservoir regularly to minimize 

build-up.
Clean inside the water reservoir with a damp, 

lint-free cloth as necessary.

1.    The steam wand should always be 

cleaned after steaming milk. Remove the 

stainless steel part and clean both 

thoroughly.

2.    Wipe the steam wand with a damp cloth, 

then with the steam wand directed back 

into the drip tray, press the STEAM 

 

button and turn STEAM control dial. This