Epson II+ Manuel D’Utilisation

If you do not have a light pen attached, press 

and 

To begin the test,

press Y and 

You see this prompt:

PLACE LIGHT PEN ON CENTER OF WHITE BLOCK

Touch the center of the white block on the screen with the light pen.

When the light pen is correctly positioned, the block moves to another part
of the screen for a second test. After three successful tests, the check ends.

An error occurs if:

l

The light pen is not connected properly

l

The light pen is malfunctioning

l

You do not touch the square within 12 seconds.

This test displays 16 different screens, each a different color, and a

message indicating the color. The screens show the following colors in the
order specified below:

1 - Black

- Blue

3 - G r e e n
4 - Cyan

5 - R e d

6 - Magenta

7 - Brown

- White

- Gray

10 - Light blue
11 - Light green

12 - Light cyan

13 - Light red

14 - Light magenta
15 - Yellow

16 - White (high intensity)

To start this test, press 9 and 

Press any key to display each screen.

On the last screen, you see this prompt:

Is the display 

correct 

(Y/N)?

If all the colors are correct, press Y and 

to end the test. If any color is

incorrect, first check the adjustment of your monitor, and then make sure
that both ends of the cable are plugged in firmly. If a problem still exists, press

and 

to display the error message.

This test is provided for service purposes only. If you accidentally select

this option, press any key to end the test.