Epson II+ Manuel D’Utilisation

To run all the tests on the menu in sequence, press 

and 

When you choose this option, all checks for the color adapter and CRT

are performed automatically in sequential order. Although you do not start

each test, you must still supply the appropriate responses to progress from
one test to the next.

Use this option to test the performance of the floppy disk drives installed

in your computer. This test includes several checks that allow you to identify
particular problems related to your floppy disk drives.

Before running these tests, format a floppy disk to use for the tests that

write data on the disk in the drive. To test a 1.2MB drive, you can use a

1.2MB or a 360KB floppy disk. However, to test the full capacity of the drive,

use only a 1.2MB disk. In a 360KB drive, you can only use a 360KB floppy
disk.

Note: The Format diskette option on the OPERATION MENU always

formats diskettes in 360KB format, regardless of the type of 

drive.

Therefore, to test a 1.2MB drive, use the MS-DOS FORMAT

command to format a high-density diskette. Also, to test a 360KB

drive, always 

use 

a double-density diskette that you formatted in a

360KB drive.

You can select the individual tests from this 

menu:

FLOPPY DISK DRIVE(S) AND CONTROLLER CHECK MENU

1 - Sequential seek check

 Random seek check

 Write, read check

4 - Speed check

- Disk change check

6 - Run all above checks

0 - Exit
Enter selection number: