Frymaster 1824E Manuel D’Utilisation

Page de 42
ii 
NOTICE 
IF, DURING THE WARRANTY PERIOD, THE CUSTOMER USES A PART FOR THIS ENODIS 
EQUIPMENT OTHER THAN AN UNMODIFIED NEW OR RECYCLED PART PURCHASED 
DIRECTLY FROM FRYMASTER DEAN, OR ANY OF ITS AUTHORIZED SERVICE CENTERS, 
AND/OR THE PART BEING USED IS MODIFIED FROM ITS ORIGINAL CONFIGURATION, THIS 
WARRANTY WILL BE VOID.  FURTHER, FRYMASTER DEAN AND ITS AFFILIATES WILL NOT BE 
LIABLE FOR ANY CLAIMS, DAMAGES OR EXPENSES INCURRED BY THE CUSTOMER WHICH 
ARISE DIRECTLY OR INDIRECTLY, IN WHOLE OR IN PART, DUE TO THE INSTALLATION OF 
ANY MODIFIED PART AND/OR PART RECEIVED FROM AN UNAUTHORIZED SERVICE CENTER.
 
 
 DANGER 
Copper wire suitable for at least 167°F (75°C) must be used for power connections. 
 
 DANGER 
The electrical power supply for this appliance must be the same as indicated on the 
rating and serial number plate located on the inside of the fryer door. 
 
 DANGER 
This appliance must be connected to the voltage and phase as specified on the rating 
and serial number plate located on the inside of the fryer door. 
 
 
DANGER 
All wiring connections for this appliance must be made in accordance with the wiring 
diagrams furnished with the equipment.  Wiring diagrams are located on the inside of 
the fryer door. 
 
 
DANGER 
Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this 
or any other appliance. 
 
 WARNING 
Do not attach accessories to this fryer unless fryer is secured from tipping. Personal 
injury may result. 
 
 WARNING 
Frymaster fryers equipped with legs are for permanent installations.  Fryers fitted with 
legs must be lifted during movement to avoid damage and possible bodily injury. For a 
moveable or portable installation, Frymaster optional equipment casters must be used. 
Questions? Call 1-800-551-8633 
 
 
WARNING  
Do not use water jets to clean this equipment. 
 
 DANGER 
All wiring connections for this appliance must be made in accordance with the wiring 
diagrams furnished with the equipment.  Wiring diagrams are located on the inside of 
the fryer door. 
 
 WARNING  
This equipment is intended for indoor use only.  Do not install or operate this 
equipment in outdoor areas.