Philips V200 Manuel D’Utilisation

 

Respironics V200 Ventilator Operator’s Manual

REF 1057983 A

Contact Respironics Customer Service at 1-800-345-6443 to arrange 
installation or refer to the installation section of the Ventilator External Battery 
Service Instructions (1013569).

When AC power becomes unavailable, the ventilator consumes power from the 
battery systems as follows:

•

With the external battery installed and turned ON and backup battery 
installed: External battery power is consumed first until depleted. 
Backup battery power is then used until depleted. An audible alarm 
sounds when the backup battery is in use. The ventilator will not 
operate when both batteries are depleted.

•

With backup battery installed only: Backup battery power is used until 
depleted. An audible alarm sounds when the backup battery is in use. 
The ventilator will not operate when the battery is depleted.

AC power can be restored to the ventilator at any time during battery use. 
When AC power is restored the ventilator consumes AC power only, and both 
batteries begin recharging. (See “Battery Charging” on page 13-10).

The external battery must be turned ON in order for the external battery to be 
used. Make sure the ON/OFF switch located on the external battery (Figure 13-
6) is in the ON (I) position. When AC power becomes unavailable, the 
ventilator automatically switches to external battery operation without 
interruption in ventilation. When the external battery is depleted, the ventilator 
automatically switches to backup battery power.